TILTA Nucleus-M – Wireless Follow Focus System

Pilotfly H2-45 – Handhelg gimbal for DSLR and mirrorless cameras
G-Technology G-SPEED Shuttle XL with Thunderbolt 3 (32TB – 96TB)

TILTA Nucleus-M – Wireless Follow Focus System

1 122,87

* without VAT


The Nucleus-M is a revolutionary wireless follow focus system. Have full control of focus, iris, and zoom on Cine lenses or compatible “cine-moded” DSLR lenses. Ideal for 3-axis gimbals, shoulder mounts systems, and drone shoots.


The Nucleus-M is a wireless 3 Channel system.
Connections between the FIZ hand unit and the two hand grips to the motors are completely wireless.
There is no MDR unit. Each motor has a wireless module that can receive a signal without the MDR, saving space and setup time.
A single motor can be powered directly from the camera’s battery though a 7-Pin to P-TAP cable then daisy chained via 7-Pin to 7-Pin cable to run additional motors.
There is no limit on the amount of motors an operator can attach per channel.
The two handle grips have a wireless range of 100 meters.
The FIZ hand unit has a wireless range of 500 meters. The signal from the FIZ hand unit can be signal boosted with an antenna accessory to 1 1/4 miles, which is ideal for long distance drone work.
Both hand grips and FIZ hand unit runs off (2) 18650 batteries. (Batteries are NOT included.)
When fully charged the batteries in the hand grips can last up to 2 days.
The batteries in the FIZ unit can last up to 10 hours.
0.8 mod, 35-tooth, 32 pitch gear with a face width of 10mm
FIZ hand unit is capable of controlling 3 channels – focus, zoom, and iris as well as overriding the hand grips.
Motors can reach calibration on lenses with out hard stops
Motors fit standard 15mm and 19mm Rods
Compatible with the Gravity G1 Handheld Gimbal

In the box

  • 1x Wireless FIZ Hand Unit
  • 2x Brushless Wireless Motors
  • 1x Wireless Handle Left (Focus)
  • 1x Wireless Handle Right (Iris, Zoom)
  • 4x Follow Focus marking disks
  • 1x 7-Pin to 740mm P-TAP Motor Power Cable
  • 1x 296mm 7-Pin to 7-Pin Straight Motor Connection Cable
  • 1x 180mm 7-Pin to 7-Pin Right Angle (90 degree) Motor Connection Cable
  • 1x 18650 4 Slot Battery Charger
  • 2x Handle to Arri Standard Rosette Adapter
  • 2x Handle to Gimbal Bar Adapter (Compatible with 25mm/30mm Diameter)
  • 1x Wireless FIZ Hand Unit Strap
  • 1x Hard Shell Waterproof Safety Case

Batteries are NOT included.


Color: Gunmetal Grey


  • Aluminum-Alloy
  • Stainless Steel
  • ABS Plastic
  • Rubber
  • Brazilian Rosewood


  • FIZ Hand Unit (with focus disk but no batteries): 0.972 lb
  • FIZ Hand Unit (with focus disk and batteries): 1.164 lb
  • Right Handle Grip (no batteries or adapters): 0.582 lb
  • Left Handle Grip (no batteries or adapters): 0.529 lb
  • Arri Rosette Male to Handle Grip Adapter: 0.161 lb
  • 25mm/30mm Gimbal to Handle Grip Adapter: 0.099 lb
  • Motor (no rail adapter): 0.419 lb
  • Motor with 15mm rail adapter: 0.496 lb
  • Motor with 19mm rail adapter: 0.487 lb

Motor Dimensions:

  • Length/Height: 4 1/2 Inches
  • Width: 2 3/4 Inches (motor plus rail adapter)
  • Width: 2 5/8 Inches (ports to tip of gear)
  • Width: 3 2/8 Inches (end to end furthest points)
  • Depth: 5/8 Inches (rail mount section)
  • Depth: 3/4 Inch (base section)
  • Depth: 1 3/8 Inches (motor section)

We use cookies to give you the best online experience. By agreeing you accept the use of cookies in accordance with our cookie policy.

I accept I decline